RFID Readers
Handheld Readers
1084 Biometric Tri-Scan Reader For Motorola MC70/75/75A

1084 Biometric Tri-Scan Reader For Motorola MC70/75/75A

The Biometric Tri-Scan Reader combines Contact Smart Card, Contactless Smart Card (RFID) and Biometric Fingerprint capture in a rugged, snap on peripheral for the Motorola MC70/75/75A.  This makes it ideal for mobile biometric and ID applications.  The fingerprint sensor is FIPS201 compliant as a single finger capture device.  The Tri-Scan reader is powered by the terminal and the mechanical design allows it to remain compatible with existing MC70/75/75A accessories such as the desktop charge cradle and car charger.

There are two versions of the product in the family:

- Optical fingerprint sensor used in the reader

– No fingerprint sensor (smartcard only)

The Tri-Scan Reader is compatible with most contact and contactless Smart Cards including all Mifare contactless cards. The contactless card reader is hardware compatible with the CAC card and ICAO ePassports. The contact Smart Card reader is compliant to ISO7816-1,2,3,4.

Please Note: This is a semi-custom, built-to-order product – minimum order quantities apply.  Please contact Perfect RFID to discuss your requirements.

Part No.

1084-03-SO-TSR – Optical finger sensor Tri-Scan

1084-04-SO-TSR - Smartcard only Tri-Scan

Product Description

  • Features

    Fingerprint Sensor

    Sensor resolution :

    508dpi (capacitive)

    500dpi (optical)

    Pixel array :

    256 x 360 pixels (capacitive)

    256 x 400 pixels (optical)

    Sensor area:

    12.8 x 18.0 mm (capacitive)

    14 x 22mm (optical)

    ESD protection:IEC 61000-4-2 Level 4 ±15kV

    Image size:Approximately 100kbyte

    Template size:Algorithm dependent – typically 100-400 bytes

    Contact Smartcard Reader

    Compliance:ISO7816-1,2,3,4 PC/SC, EMV2000 Level 1 capable.

    T=0, T=1 Protocol. I2C

    Connector:Meets ISO 7816-2, rated for >100 000 insertions

    Card size:Full (ID-1)

    Card support:Up to 420kbps card interface, clock frequency up to 8MHz,

    5V, 3V, 1.8V smart cards

    Contactless Smartcard Reader

    RF Transmit Frequency:13.56MHz

    Supported RFID Standards :ISO14443A, ISO14443B, ISO 15693, ISO 18000-3

    Supported contactless cards

    + ISO15693

    + ISO14443A/B

    + Phillips: MIFARE, DESFire, MIFARE ProX, SMART MX

    Reading distance:Intended for in-slot card reading, capable of reading up to 2.5cm (1?) from back surface dependent on transponder type

    Connection Interfaces

    Charging of host terminal :Possible through reader

    Reader power supply:Powered from host terminal

    ActiveSync :via USB, automatically switched when connected to a PC

    Physical Characteristics

    Dimensions:90×82×36mm (3.54?x3.23?x1.42?)


    100g (3.6 oz) Capacitive

    110g (3.9 oz) Optical

    Enclosure material :Lexan Polycarbonate/ABS

    Colour :Grey

    Material finish :Sparked surface

    Mechanical attachment :Snap-on action with optional locking screws

    Docking :Attachment maintains dockability with Motorola docking cradle for

    charging and ActiveSync

  • No images found
    • Get in touch with us

      Suggest similar products.

      • RFID Readers
      • RFID Antennas
      • RFID Tags
      • RFID Accessories
    Perfect ID - RFID Tags & Inlays